Deburrer - Power Pack

Catalogue - deburrers

 

SET B

Rotary deburring

Set B consists of the blades B10, B20, B and handle A. The blades can be clamped axially or radially. The minimum working diameter of the bore is 3.0 mm. All blades are made of high speed steel or tungsten carbide.

 

B10 - ideal for materials with spiral chips such as aluminium, plastic and steel

B10P - B10withPVD coating for machining with high wear intensity

B10C - B10made of tungsten carbide for hardened steel (from HRc 38)

B10D - diamond-coated for tungsten carbide, glass, etc.

B10L - B10 - version for left-handers

B12 - like B10, but with a shorter spike

B12P - B12withPVD coating for machining with high wear intensity 

B20 - for deburring brass, cast iron and metals with a short frangible chip clockwise and counter-clockwise

B20P - B20withPVD coating for machining with high wear intensity  

B20C - B20made of tungsten carbide for hardened steel (from HRc 38)

B30 - simultaneous inner and outer hole deburring up to a wall thickness of 4 mm

B30P - B30with PVD coating for machining with high wear intensity   

B32 - like B30, for brass and cast iron, deburring clockwise and counterclockwise

B50 - scriber, carbide tip can be re-sharpened

B60 - hole deburring on the underside at a wall thickness up to 20 mm

B70 - sheet deburring up to a  thickness of 3 mm (recommended hand protection 3G)

 

SET E

High performance rotary deburring

SetEconsists of the reinforced blades E100, E200 and E300, bracket E and handle A. The minimum working diameter of the hole is 4.0 mm. All blades are made of high-quality high speed steel or tungsten carbide.

E100 - excellent for aluminium, plastic and steel.

E100P - E100 PVD coated for various machining with high intensity wear

E100C - E100 made of tungsten carbide for hardened steel (from HRc 38)

B10D - diamond-coated E100 for tungsten carbide, glass, etc.

E100L - E100 - version for left-handers

E110 - cutting edge B10 on the longer  handle E

E110P - E110withPVD coating for machining with high wear intensity   

E200 - for deburring brass, cast iron and metals with a short frangible chip clockwise and counter-clockwise

E200P - E200withPVD coating for machining with high wear intensity    

E200C - E200 made of tungsten carbide for hardened steel (from HRc 38)

E300 - simultaneous external and internal deburring of holes up to a wall thickness of 4 mm

E320 - like E300, for brass and cast iron, deburring clockwise and counterclockwise

E350 - ideal for deburring straight edges, keyways, etc.

E600 - hole deburring on the underside at a wall thickness up to 20 mm

E601 - extended version E600 for a wall thickness up to 40 mm

E700 - ideal for plastic, internal deburring of thick-walled holes

 

SHAVIV 1

It is an original deburrer with a robust blade holder. For all set E blades. Ideal for high mounting thanks to its compact design. This set consists of the blades E100, E200 and E300.

 

MB 1 MULTIBURR

Versatile deburrer set E blades. The blade if moved with a button. The MB E100 line includes the E100 blades.

 

SET G

Slot deburring

Set G includes G10 replaceable plates,  bracket G, handle A and a key

  • for deburring keyways and slots
  • for internal and external grooves

G10 - standard plates for grooves up to a width of 15 mm

G20 - for narrow keyways and notches up to a width of 10 mm

G40 - for the narrowest notches up to a width of 2 mm

  • replaceable HSS plates with 8 blades
  • 2 types of holders for an optimum cutting angle
  • 3G hand protection should be used

 

SET C

The Shaviv set of scrapers  Set C consists of scrapers C42, holderC, handle A and a key

  • All scrapers made of HSS, hardened - precisely ground, even hard-to-reach places can be worked on with the telescopic scraper holder
  • HSS replaceable plates with 8 blades
  • 2 types of holders for an optimum cutting angle
  • 3G hand protection should be used

 

SET D

For sheets

Set D contains: replaceable plates D80, holder D, handle A and a key.

  • for deburring thick plates up to 8 mm
  • plates Dare made of tungsten carbide or HSS
  • 3G hand protection should be used

D80 - deburres sheets up to a thickness of 3 mm, scratches surfaces,  6 blades

D82 - high-performance tungsten carbide plates for sheets up to a thickness of 8 mm, 2 blades

D85 - deburres sheets up to a thickness of  7 mm, extra hard plates made of HSS with 6 blades, a special chip breaker for holder D5 improves chip flow and cut quality

 

SET H

For the hardest jobs on sheets Set H consists of two removable plates H10, holder H, handle A and a key

  • it deburres sheets up to 12 mm thick
  • deburring edges of a sharp outer angle
  • no clamping is needed
  • all plates are made of HSS
  • 8 blades for a longer service life, polished groove for chip disposal
  • 3G hand protection should be used

 

TriRel (SET G3)

For cutting in corners Set TriRel consists of interchangeable plates G30, držáku G3, handle Aand a key

  • it removes bulges formed from edges after machining
  • the plates have three blades
  • plates made of HSS, or Tungsten carbide on request
  • the special holder facilitates work

 

SET FR

A simple way for deburring or chamfering the edges of the opening. The set FR consists of a countersink F20, holder FR and handle A.

  • with the use of ratchets, conical boring becomes a piece of cake
  • deburring in the narrowest space available
  • all countersinks are made of HSS
  • the holder of countersink F is also available without ratchets

 

Miniature tools

Scraping and deburring tools. Miniature tools, ideal for shaping and creating countersinks. Their small dimensions allow cutting in hard-to-reach places.

UB34 - mini-deburrer with a short handle, holes from a diameter of 2 mm

UB38 - rotary mini-deburrer, holes from a diameter of 2 mm

US4 - bent corner scraper

US3 - round scraper

US2 - flat scraper

US1 - triangular scraper

UF1 - flat file coated with diamond grit

 

UNIBURR

Deburrer at your fingertips at any time

UB1 - with the blade E100

UB2 - with the blade B10

Available in your colours, with the company name and telephone

 

HC 1

Handy Chuck toolholder

For fixing a small file, drill, reamer, screw-tap, countersink and a terminal. It grips objects with a diameter of 1-8 mm. For repairing clocks, fine mechanical work, and the assembly of small electrical appliances and miniaturized electronic components.

 

SET 3G hand protection

3G hand protection

  • hand protection made of stainless steel
  • for all Shaviv holders 
  • easy to build in a suitable place
  • particularly recommended set D, G and H

 

SET K

Flat scraper

Set K consists of blade K10, holder K, handle A and a key

  • for modifying plastic surfaces and corners
  • excellent for scraping colour lines on walls and other surfaces

 

GRIFF A, GRIFF A Aluminium

Universal handle of Shaviv tools made from plastic

for all Shaviv holders

simple quick-fastening system, replaced the holder after pulling and turning

spare blades in the handle, simply rotate the lid

Universal handle of Shaviv tools made from aluminium

Robust design for particularly heavy work

 

KWC

Set of deburring tools.

The set contains: handle A, holder B, C, D, E, F, blades, a scraper a cutting edges B10, B20, B30, B50, B60, B70, C40, C42, D80, E100, E200, E300, E350, E600 and F20

 

KPC

Set of deburring tools

The kit contains 5 standard sets B, C, D, E, F.

 

TD

Set of miniature deburring tools

The set contains 6 tools for particularly precise work UF1, US1, US2, US3, US4 and UB38.